Select

360 Degree Ceiling Mount PIR Presence Detector -Dual Channel Output for HVAC and Lighting Control - KNX Compatible

Presence Control PRO IR Quattro HD COM2

Detection Zone	Reach: 8 - 20 mts. adjustable in a square detection pattern to eliminate any blind or undetected areas. The fine / small motion area is 8x8 mts. (64 sq.-mts.)
Mechanically Adjustable Reach	The square detection zone can be mechanically adjusted with a potentiometer for specific detection in the area.
Technical Highlights	The sensor has 2 channels, one for the lighting which operates in response to the ambient lux and presence of people. The second channel operates the heating, ventilation and air conditioning systems in relation to presence only.
Applications	Conference rooms, Training Halls and Meeting rooms, Class Rooms, Staff Rooms, Office Cabins
Technology	Passive Infrared / PIR - 4800 switching zones and 13 detection levels for sensing small movements normally found in a seated postion, with 4 highly sensitive pyro detectors. The digital technology improves signal evaluation without switching errors.
Mounting	Ceiling Mount PIR Presence Sensor - Mounting Height: 2.5 mts to 10 mts.
Settings	Digital Bus Interface using the ETS software or remote control.
Lighting Channels Light 1 - Light 4 (4 scene controls) Stay - "ON" time Lighting Controller Time	Suitable for switching / dimming and scene control upto 4 scenarios. Constant light control with mixed light measurement. :: 1 - 30 minutes depending on presence and brightness :: Automatic time adjustment - The sensor analyzes the movement and automatically adjusts the time delay for the user. Basic brightness 'ON' duration, 1-30 minutes
HVAC Channel Time Setting	:: 1 minutes. - 2 hours - Manually adjustable - switch 'ON' delay :: 1 - 30 minutes Automatic time adjustment - switch 'OFF' delay. The room surveillance function allows the user to set a delay time before starting the HVAC loads. This feature automatically adjusts the time for the starter based on the movement pattern
Presence Detection Time Setting	Presence stay 'ON' time output :: 1 - 255 sec. This watchdog function can be paused during daytime and enabled at night or over the weekend for a specific duration.
Lux setting facility	The light measurement operates in relation to ambient brightness and lux level using the mixed light measurement format. The basic brightness or courtesy light level has two stages - 1. OFF 2. 10% - 50%
Digital Outputs	1. Presence Detection 2. Lighting Control 3. Brightness Control 4. HVAC Control
Master & Slave	Individual luminaires can be hardwired for connecting them in parallel which is suitable for the Master & Slave Operation and enhancement of the zonal coverage of detection.
Handheld Remote Control	Infra Red Control available for parameter settings
Supply	24V DC via the KNX bus voltage
IP Rating	IP 54 with surface mounting and IP 20 with recessed mounting.
Mounting Adapters	Clamping-type ceiling adapter Control PRO UP BoxSurface-mounting adapter Control PRO AP Box (IP 54)